Homemade DIY CNC Series - 1/4 Thick Aluminum Test Bracket - Neo7CNC.com
http://www.neo7cnc.com In this video I'm cutting some test brackets out of 1/4 thick aluminum. Cutting speed is 30 IPM, 0.05 DOC, 50% step over, 24k RPM using a 1/8 carbide single flute...
http://www.neo7cnc.com In this video I'm cutting some test brackets out of 1/4 thick aluminum. Cutting speed is 30 IPM, 0.05 DOC, 50% step over, 24k RPM using a 1/8 carbide single flute...
Published: 23-12-2011
Duration: 4:26
Definition: hd
View: 488581
Like: 865
Dislike: 39
Favorite: 0
Comment: 226
Duration: 4:26
Definition: hd
View: 488581
Like: 865
Dislike: 39
Favorite: 0
Comment: 226
Aluminium milling on DIY CNC
Complete manufacturing of a small workpiece on my diy cnc. CAD/CAM was Fusion 360. Especially the CAM Engine of Fusion is very powerfull. Allthough the machine used in this Video is not really...
Complete manufacturing of a small workpiece on my diy cnc. CAD/CAM was Fusion 360. Especially the CAM Engine of Fusion is very powerfull. Allthough the machine used in this Video is not really...
Published: 28-03-2016
Duration: 12:40
Definition: hd
View: 170917
Like: 405
Dislike: 23
Favorite: 0
Comment: 68
Duration: 12:40
Definition: hd
View: 170917
Like: 405
Dislike: 23
Favorite: 0
Comment: 68
DIY CNC Router milling 6061 aluminium ( aluminum ) UCCNC
My DIY CNC Router machining a bracket from 16mm 6061 plate aluminium. Using the "masking tape/superglue" hold down method. 6MM 2 flute carbide endmill. 16000 RPM. 1400mm/min feedrate. UCCNC...
My DIY CNC Router machining a bracket from 16mm 6061 plate aluminium. Using the "masking tape/superglue" hold down method. 6MM 2 flute carbide endmill. 16000 RPM. 1400mm/min feedrate. UCCNC...
Published: 02-02-2017
Duration: 2:21
Definition: hd
View: 9447
Like: 36
Dislike: 0
Favorite: 0
Comment: 27
Duration: 2:21
Definition: hd
View: 9447
Like: 36
Dislike: 0
Favorite: 0
Comment: 27
Aluminium CNC Router Build - Z Axis Lower Bearing Plate (Ep14)
Making the next aluminum part z axis of my diy CNC machine. This is the lower of the two bearing mounts which connect the Z Axis to the Y. More videos coming soon! Link to my build log on...
Making the next aluminum part z axis of my diy CNC machine. This is the lower of the two bearing mounts which connect the Z Axis to the Y. More videos coming soon! Link to my build log on...
Published: 13-04-2017
Duration: 14:29
Definition: hd
View: 21825
Like: 90
Dislike: 3
Favorite: 0
Comment: 12
Duration: 14:29
Definition: hd
View: 21825
Like: 90
Dislike: 3
Favorite: 0
Comment: 12
DIY CNC milling aluminium
My diy cnc machine milling aluminium at 1200mm/min, 1mm DOC 30% stepover @ 18.000RPM. It's a 40mmx40mmx15mm rectangular pocket with an 8mm tool, enjoy! Read more here: http://www.cnczone.com/for...
My diy cnc machine milling aluminium at 1200mm/min, 1mm DOC 30% stepover @ 18.000RPM. It's a 40mmx40mmx15mm rectangular pocket with an 8mm tool, enjoy! Read more here: http://www.cnczone.com/for...
Published: 17-03-2016
Duration: 0:44
Definition: hd
View: 5462
Like: 19
Dislike: 0
Favorite: 0
Comment: 3
Duration: 0:44
Definition: hd
View: 5462
Like: 19
Dislike: 0
Favorite: 0
Comment: 3
Homemade DIY CNC - KR33 Mini CNC System - 1st Test Cut - Neo7CNC.com
Here is the 1st test cut with the THK KR33 Systems that I'm developing. I'm very pleased with the results. The system uses THK KR33 linear actuators for the motion components, 80/20 aluminum...
Here is the 1st test cut with the THK KR33 Systems that I'm developing. I'm very pleased with the results. The system uses THK KR33 linear actuators for the motion components, 80/20 aluminum...
Published: 14-04-2014
Duration: 6:35
Definition: hd
View: 933472
Like: 1763
Dislike: 141
Favorite: 0
Comment: 98
Duration: 6:35
Definition: hd
View: 933472
Like: 1763
Dislike: 141
Favorite: 0
Comment: 98
DIY CNC Machine : Troublesome machining of Aluminium part
Herstellung eines Teils aus 6082 Aluminium für einen Werkzeuglängensensor. Maschine : Eigenbau CNC Fräse mit luftgekühlter 2.2kW HF Spindel. Machining an Aluminium 6082 part on homemade...
Herstellung eines Teils aus 6082 Aluminium für einen Werkzeuglängensensor. Maschine : Eigenbau CNC Fräse mit luftgekühlter 2.2kW HF Spindel. Machining an Aluminium 6082 part on homemade...
Published: 04-08-2017
Duration: 7:13
Definition: hd
View: 16232
Like: 82
Dislike: 1
Favorite: 0
Comment: 11
Duration: 7:13
Definition: hd
View: 16232
Like: 82
Dislike: 1
Favorite: 0
Comment: 11
CNC USB Controller - Milling 20mm aluminium with MiniCNC
http:://www.planet-cnc.com - Milling 20mm aluminium with MiniCNC.
http:://www.planet-cnc.com - Milling 20mm aluminium with MiniCNC.
Published: 17-10-2014
Duration: 5:41
Definition: hd
View: 73699
Like: 100
Dislike: 38
Favorite: 0
Comment: 45
Duration: 5:41
Definition: hd
View: 73699
Like: 100
Dislike: 38
Favorite: 0
Comment: 45
DIY CNC machine milling 15mm aluminium
Milling some 15mm aluminum parts for the Husqvarna bike. There is used a 6mm flat mill, 5mm D.O.C. at 900mm/m.
Milling some 15mm aluminum parts for the Husqvarna bike. There is used a 6mm flat mill, 5mm D.O.C. at 900mm/m.
Published: 27-03-2016
Duration: 2:43
Definition: hd
View: 6065
Like: 14
Dislike: 1
Favorite: 0
Comment: 2
Duration: 2:43
Definition: hd
View: 6065
Like: 14
Dislike: 1
Favorite: 0
Comment: 2
CNC Project #3 - Building the VRail Frame
In the previous videos we looked at preparing the design and base (Table) for the CNC, now we get to work assembling the Aluminium Openbuilds VRail frame. For me this was sourced from SNB Solutions...
In the previous videos we looked at preparing the design and base (Table) for the CNC, now we get to work assembling the Aluminium Openbuilds VRail frame. For me this was sourced from SNB Solutions...
Published: 31-10-2015
Duration: 49:52
Definition: hd
View: 94595
Like: 461
Dislike: 20
Favorite: 0
Comment: 55
Duration: 49:52
Definition: hd
View: 94595
Like: 461
Dislike: 20
Favorite: 0
Comment: 55
DIY CNC milling aluminium bracket / Фезеровка кронштейна на ЧПУ
Full cycle of making the holding bracket for the Multi-camera rig using a DIY CNC router. Material - 3mm aircraft aluminium Tool - 4mm 2-flute endmill Stepdown - 0.1mm Milling time - 65 min....
Full cycle of making the holding bracket for the Multi-camera rig using a DIY CNC router. Material - 3mm aircraft aluminium Tool - 4mm 2-flute endmill Stepdown - 0.1mm Milling time - 65 min....
Published: 15-10-2015
Duration: 8:4
Definition: hd
View: 22170
Like:
Dislike:
Favorite: 0
Comment: 14
Duration: 8:4
Definition: hd
View: 22170
Like:
Dislike:
Favorite: 0
Comment: 14
Aluminum cnc build
Finally.
Finally.
Published: 13-07-2016
Duration: 2:52
Definition: hd
View: 1565
Like: 7
Dislike: 0
Favorite: 0
Comment: 3
Duration: 2:52
Definition: hd
View: 1565
Like: 7
Dislike: 0
Favorite: 0
Comment: 3
Homemade (DIY) CNC milling aluminum, rigid and 2.2 kW!
Homemade CNC. It's a work in progress and will have upgrades in the future. Equipped with a hertz 2.2 kW spindle.
Homemade CNC. It's a work in progress and will have upgrades in the future. Equipped with a hertz 2.2 kW spindle.
Published: 06-12-2015
Duration: 2:21
Definition: hd
View: 8278
Like: 22
Dislike: 0
Favorite: 0
Comment: 6
Duration: 2:21
Definition: hd
View: 8278
Like: 22
Dislike: 0
Favorite: 0
Comment: 6
DIY homebuilt 3 axis CNC router, CUTTING ALUMINUM
Plans for this machine are available on ebay. http://shop.ebay.com/momus_design/m.html?_trksid=p4340.l2562 Unique fully enclosed benchtop CNC router design. Designed to be fast, accurate,...
Plans for this machine are available on ebay. http://shop.ebay.com/momus_design/m.html?_trksid=p4340.l2562 Unique fully enclosed benchtop CNC router design. Designed to be fast, accurate,...
Published: 05-07-2010
Duration: 3:32
Definition: hd
View: 253488
Like: 207
Dislike: 25
Favorite: 0
Comment: 74
Duration: 3:32
Definition: hd
View: 253488
Like: 207
Dislike: 25
Favorite: 0
Comment: 74
Raw 1.3 CNC DIY machine cutting aluminium
Raw 1.3 cutting aluminum. To cut aluminum can be difficult, you will need the right speed and RPM to succeed. You can read my article on how to cut aluminum on cncraw.com. Raw 1.3 is a CNC...
Raw 1.3 cutting aluminum. To cut aluminum can be difficult, you will need the right speed and RPM to succeed. You can read my article on how to cut aluminum on cncraw.com. Raw 1.3 is a CNC...
Published: 07-12-2014
Duration: 3:43
Definition: sd
View: 15634
Like: 31
Dislike: 2
Favorite: 0
Comment: 3
Duration: 3:43
Definition: sd
View: 15634
Like: 31
Dislike: 2
Favorite: 0
Comment: 3
Cnc router build homemade ballscrew first moves ball screw aluminium
Ballscrew driven Cnc router build first 3 axis movements. 1300x1300x200 plus change. 24k spindle speeds. 10000mm/min X & Y axis 6000 Z axis. Still need to build a table as I don't think the...
Ballscrew driven Cnc router build first 3 axis movements. 1300x1300x200 plus change. 24k spindle speeds. 10000mm/min X & Y axis 6000 Z axis. Still need to build a table as I don't think the...
Published: 29-12-2016
Duration: 0:56
Definition: hd
View: 1971
Like: 8
Dislike: 1
Favorite: 0
Comment: 2
Duration: 0:56
Definition: hd
View: 1971
Like: 8
Dislike: 1
Favorite: 0
Comment: 2
DIY CNC KIT V3 cuts perfect aluminum parts, high value, low cost $millions!
See more of VERSION 3 here â€" http://www.pdjinc.com This CNC has run nearly everyday for over a year producing aluminum parts and is still dead nuts on! More Precision, More Quality, More...
See more of VERSION 3 here â€" http://www.pdjinc.com This CNC has run nearly everyday for over a year producing aluminum parts and is still dead nuts on! More Precision, More Quality, More...
Published: 28-03-2017
Duration: 1:52
Definition: sd
View: 4135
Like:
Dislike:
Favorite: 0
Comment:
Duration: 1:52
Definition: sd
View: 4135
Like:
Dislike:
Favorite: 0
Comment:
The "Stupid Strong" DIY CNC | Introduction
I have plans for what I hope will be an extremely strong and reliable desktop CNC to cut wood and aluminum parts. I designed the DIY CNC in Fusion 360 with a budget of under $1000 dollars....
I have plans for what I hope will be an extremely strong and reliable desktop CNC to cut wood and aluminum parts. I designed the DIY CNC in Fusion 360 with a budget of under $1000 dollars....
Published: 20-03-2017
Duration: 5:48
Definition: hd
View: 100741
Like: 1624
Dislike: 148
Favorite: 0
Comment: 153
Duration: 5:48
Definition: hd
View: 100741
Like: 1624
Dislike: 148
Favorite: 0
Comment: 153
DIY CNC homing, auto tool zero, and milling aluminium
Short video of referencing axes on my machine, showing auto tool zeroing routine, and finally milling some aluminium. Any questions? Feel free to ask.
Short video of referencing axes on my machine, showing auto tool zeroing routine, and finally milling some aluminium. Any questions? Feel free to ask.
Published: 12-11-2015
Duration: 8:2
Definition: hd
View: 57097
Like: 196
Dislike: 24
Favorite: 0
Comment: 74
Duration: 8:2
Definition: hd
View: 57097
Like: 196
Dislike: 24
Favorite: 0
Comment: 74
machining aluminium part with inclined surfaces on homemade CNC // Eigenbau Fräse
Fräsen eines Teils mit verschieden stark geneigten Flächen. Die Parallelbearbeitungsstrategie mit Kugelfräser am Ende hat nicht das erhoffte Ergebnis geliefert und mir die Oberfläche ein...
Fräsen eines Teils mit verschieden stark geneigten Flächen. Die Parallelbearbeitungsstrategie mit Kugelfräser am Ende hat nicht das erhoffte Ergebnis geliefert und mir die Oberfläche ein...
Published: 02-09-2017
Duration: 13:54
Definition: hd
View: 7343
Like: 62
Dislike: 2
Favorite: 0
Comment: 7
Duration: 13:54
Definition: hd
View: 7343
Like: 62
Dislike: 2
Favorite: 0
Comment: 7
0 comments:
Post a Comment